Kenwood NX-P1302AUK UHF Analog 2W Radio

The following does not apply to FRS, MURS, GMRS, LTE, Satellite, or IP radios.

Most business radios aren't ready to use out-of-the-box. So radio programming is needed to set the frequencies in the radio. For some radios the frequencies can be set through a menu interface. While other radios must be programmed using a PC, radio software, and a cable to connect the radios.

Here are your programming options:

1. We can program your radios - with radio orders 
• We provide basic radio programming for radios ordered through us. See the description below of basic radio programming.
• Email us your Frequencies & Call Sign - the FCC requires dealers to verify your license before we program.
• Please allow 1-2 days for first-time setup of radio programming.
• Due to staffing limitations, we are not able to program radios purchased from other dealers.
2. Match to your Previous Order
• If you've ordered from us before we have your information stored.
3. You can program the radio(s)
• Connect Systems (all models): You can purchase software and cables from us. 
• Kenwood ProTalk Business Radios (NX-P1300/NX-P1200 series, TK series, PKT)
• Have pre-stored frequencies and you can easily program these radios through the radio's menu interface.
• Custom frequencies will require dealer programming.
• Icom (all models): Icom no longer allows dealers to sell software and cables over the internet. You may call us to discuss your options.
• Motorola Business Radios (models beginning with CLP. CLS, RM, RD):
• Have pre-stored business frequencies (Part 90). Software to program these radios is available on the Motorola website.
• Just go to the product page on Motorola's website and you can download it for free. We can sell you the cable.
• Custom frequencies will require dealer programming.
• Motorola Commercial Radios (models beginning with CP, CM, MagOne):
• Software to program these can be purchased directly from Motorola. We can sell you the cable.
• Vertex Standard Radios:  You can purchase software and cables from us. (some cables have been discontinued)
4. If you don't have a FCC license we can help you apply for one.
• These licenses are for businesses, non-profit organizations, local and state government agencies.
• We do all the work! Give us a call at 855-289-2929.
  

What is included in Basic Radio Programming?

Basic radio programming is designed to get you up and running with a configuration which includes:

• Up to 16 channels programmed to your FCC assigned frequencies (simplex or duplex)
• A default configuration of key functions
• Your program settings saved for future purchases
• No password protection to allow re-programming by another person

For customers who already have radios we will match from your existing radio of the same model (requires you to send us a radio). 

Programming Services Not Included:

At this time we do not provide programming of advanced features. The features below are NOT included with basic programming.

• Programming radios purchased elsewhere
  
• More Than 16 Channels
• Channel Scan / Priority Scan
• Encryption
• Signal Tones (DTMF, 5-Tone, 2-Tone)
  
• Private (1 to 1) calling
• Group 1 to many calling
• All Call
• Emergency System
• Man Down System
• Lone Worker
• Advanced Audio Profiles
• Dual Capacity Direct Mode
• Voice Announcement
• Text Messaging
• Work Order Ticketing
• ARTS
• Remote Monitor
• Telephone Interconnect

* This does not include all advanced features and should only be used to establish an example of what features are considered advanced.