- Stock: In Stock
- Brand: ICOM
- Model: IC-F5330D - IC-F6330D
- SKU: F5330D-F6330D
Available Options
Icom IC-F5330D | IC-F6330D - Digital Mobile Radio
- Remote Control Radio
- 128 Channels, 8 Zones
- Flexible Installation Using an Ethernet Cable Between Radio and Commandmic™
- Hands-free Operation with Bluetooth Headset (Optional)
- Digital & Analog Mixed Mode
- 45 / 50 Watts (UHF/VHF)
- Wider UHF Range 400-520 MHz
- Digital & Analog Mixed Mode
- Repeater Capable
- PC Programming Setup
- Supports ICOM's Digital Advanced System - IDAS™
- Multi-site Conventional & Single-site IDAS Trunking Capable
F5330D | F6330D At-A-Glance
The IC-F5330D/F6330D series offers a flexible and unique installation solution that allows the main radio unit and remote-controller to be connected using an Ethernet cable, and can be extended up to 100 m, 328 ft with an inexpensive Cat 5e LAN cable. The remote-controller is a Commandmic™ that controls the radio remotely, with a high contrast black LCD. Also, the Commandmic™ has built-in Bluetooth® function as standard, and hands-free calling is possible in combination with a compatible Bluetooth ® headset.
F5330D | F6330D Signaling Features
The F5330D F6330D radio includes a host of signalling options including: CTCSS and DTCS tone • 2-Tone and 5-Tone • MDC functions; PTT ID, Emergency (TX/RX), Radio check (RX), Stun (RX), Revive (RX) • BIIS PTT ID transmission, PTT ID and ANI • Over-the-Air Alias (OAA) displays the caller’s name without programming • Individual, Group and All call • Late entry for Group call • Status call and Polling call • Short data messages • Call alert • Radio check (RX only).
F5330D | F6330D Operating Modes
The following operating modes come standard on the F5330D F6330D radios:
- NXDN™ conventional
- NXDN™ Type-D single-site trunking
- NXDN™ simulcast
- NXDN™ multi-site conventional over IP network
- Analog mode
1 F5330D or F6330D Radio (choose; VHF or UHF)
1 Commandmic™ with 6.2 m, 20.3 ft ethernet cable
1 Power Cable
1 Mounting Bracket
1 Mic Hanger
1 Owner's Manual
Antenna Information
You will need an antenna for this radio. When selecting an antenna please note:
- The specific frequencies you use in the radio must fall within the antenna's frequency range.
- You will need an antenna mount with a PL259 connector to attach the antenna to this radio.
- If the mounting surface is NOT metal you will need a "No Ground Plane" antenna. Metal surfaces can use either type.
- "Accessories > Antennas | Mobile" category has More antennas and mounts, including no ground plane antennas.
* Radios modified at the customer's request, such as programming or installation of logic boards, are not returnable. For more information please see our Returns Policy.
This radio is requires an FCC license to operate. We can assist you with getting a license.
| General Features | |
| FCC Approval | Part 90 (Business License) |
| Frequency Band(s) | VHF 136-174MHz, UHF 400-520MHz |
| # of Channels & Zones | 128 Channels, 8 Zones (Groups) |
| Output Power | 50W (VHF) & 45W (UHF) |
| Display | Display on the Commandmic |
| # of Programmable Keys | Uses Command Mic |
| Receiving Audio Output | 1700 mW (typical) audio output from the Commandmic |
| Digital | Yes (digital & analog) |
| Trunking Capable | NXDN™ Type-D single-site trunking, NXDN™ simulcast, NXDN™ multi-site conventional over IP network, |
| Voice Scrambler | Encryption | Yes - Digital mode only |
Radio Programming Options
The following does not apply to FRS, MURS, GMRS, LTE, Satellite, or IP radios.
Most business radios aren't ready to use out-of-the-box. So radio programming is needed to set the frequencies in the radio. For some radios the frequencies can be set through a menu interface. While other radios must be programmed using a PC, radio software, and a cable to connect the radios.
Here are your programming options:
- We can program your radios - with radio orders
- We provide basic radio programming for radios ordered through us. See the description below of basic radio programming.
- Email us your Frequencies & Call Sign - the FCC requires dealers to verify your license before we program.
- Please allow 1-2 days for first-time setup of radio programming.
- Due to staffing limitations, we are not able to program radios purchased from other dealers.
- Match to your Previous Order
- If you've ordered from us before we have your information stored.
- You can program the radio(s)
- Connect Systems (all models): You can purchase software and cables from us.
- Kenwood ProTalk Business Radios (NX-P1300/NX-P1200 series, TK series, PKT)
- Have pre-stored frequencies and you can easily program these radios through the radio's menu interface.
- Custom frequencies will require dealer programming.
- Icom (all models): Icom no longer allows dealers to sell software and cables over the internet. You may call us to discuss your options.
- Motorola Business Radios (models beginning with CLP. CLS, RM, RD):
- Have pre-stored business frequencies (Part 90). Software to program these radios is available on the Motorola website.
- Just go to the product page on Motorola's website and you can download it for free. We can sell you the cable.
- Custom frequencies will require dealer programming.
- Motorola Commercial Radios (models beginning with CP, CM, MagOne):
- Software to program these can be purchased directly from Motorola. We can sell you the cable.
- Vertex Standard Radios: You can purchase software and cables from us. (some cables have been discontinued)
- If you don't have a FCC license we can help you apply for one.
- These licenses are for businesses, non-profit organizations, local and state government agencies.
- We do all the work! Give us a call at 855-289-2929.
What is included in Basic Radio Programming?
Basic radio programming is designed to get you up and running with a configuration which includes:
- Up to 16 channels programmed to your FCC assigned frequencies (simplex or duplex)
- A default configuration of key functions
- Your program settings saved for future purchases
- No password protection to allow re-programming by another person
For customers who already have radios we will match from your existing radio of the same model (requires you to send us a radio).
Programming Services Not Included:
At this time we do not provide programming of advanced features. The features below are NOT included with basic programming.
- Programming radios purchased elsewhere
- More Than 16 Channels
- Channel Scan / Priority Scan
- Encryption
- Signal Tones (DTMF, 5-Tone, 2-Tone)
- Private (1 to 1) calling
- Group 1 to many calling
- All Call
- Emergency System
- Man Down System
- Lone Worker
- Advanced Audio Profiles
- Dual Capacity Direct Mode
- Voice Announcement
- Text Messaging
- Work Order Ticketing
- ARTS
- Remote Monitor
- Telephone Interconnect
* This does not include all advanced features and should only be used to establish an example of what features are considered advanced.
| Thumb | File information |
 | F5330D F6330D Instructions.pdf File Size608.75KB |
| F5330D F6330D Operating Guide.pdf File Size1.68MB |
| F5330D F6330D Spec Sheet.pdf File Size572.86KB |
| F5330D F6330D PoE Install.pdf File Size1.54MB |
| F5330D F6330D VS-3 Pairing.pdf File Size1.3MB |
| Thumb | Link Name |
| Icom F5330D F6330D Overview Video |