Icom F5021 VHF | F6021 UHF Mobile Radio

Icom IC-F5021 | IC-F6021 Affordable Yet Powerful

• 128 Channels, 8 Zoness
• 6 Programmable Buttons
• 8 Character Display
• 45 / 50 Watts (UHF/VHF)
• Easy to Use
• MDC 1200 Compatible¹ 
• Repeater Capable
• Supports Most Used Signaling Types

Icom IC-F5021 | IC-F6021 At-A-Glance

Icom's IC-F5021 | IC-F6021 mobile radio, ICOM's next step up from the F5011/F6011, is a great choice for businesses needing an easy to use mobile radio that has a wide range of functions.  It is a great solution for most mobile users at a very affordable price.   This radio is ideal for use in small to mid-sized fleets used for public safety operations, school buses, taxi fleets, large industries, and other light commercial users.

The IC-F5021 | IC-F6021 is built for the riggers of daily use.  ICOM's rugged construction and design make the IC-F5021 | IC-F6021 a perfect choice for anyone seeking a mobile radio that will hold up under constant use in rough conditions.  The radio has been tested to military standards MIL-STD 810 F for ruggedness in harsh locations.  It has a front mounted 4 watt speaker to deliver clear loud audio.  

The IC-F5021 | IC-F6021 has 128 channels that can be separated into 8 memory zones.  Channels can be given an 8 character name that will show on the display for easy identification.  There are 'up' and  'down' navigation buttons to make channel and menu selection easy.  In addition, there are 4 programmable buttons for you to customize functions to meet your particular needs.

Icom IC-F5021 | IC-F6021 Signaling Featurers

The IC-F5021 | IC-F6021 supports ten 2-tone, and eight 5-tone codes that can be decoded on each channel.  When a matched tone is received, the following items are programmable for each code: • Beep sound • Answer back • Scan • Bell icon • Radio Stun / Kill / Revive.  The radio stun/kill function incapacitates a stolen radio over the air, eliminating security threats from undesired listeners. When the stun command is received, all the functions will be temporarily locked out until the revive command is received or the unlock password is entered.  

The IC-F5021 | IC-F6021 can be used in existing MDC fleets, and has the following MDC signaling features: • PTT ID (TX/RX) • Radio check (RX) • Radio stun (RX) • Radio revive (RX) • Emergency TX/RX (No ACK) • 5 alias table.

The IC-F5012/F6021 also has CTCSS/DTCS high speed decode for better performance and 2-Tone decode accuracy.  In addition, it has up to 8 DTMF Autodial memories.

Icom IC-F5021 | IC-F6021 Scanning Features

The IC-F5021 | IC-F6021 has several enhanced scan features.  priority scan function allows you to monitor one or two priority channels, while scanning other non-priority channels.  The TX channel and Talk Back functions allow you to make a quick response while scanning.  When in Mode Dependent Scan, scan setting is dependent on the operating channel.  When you change the operating channel, the scan list automatically changes to the list set for that channel.  This allows you to move
seamlessly to a different operating area, and scan settings will automatically be adjusted.  The TX channel setting allows you to program a transmit channel while scanning.  Start channel, last detected channel, priority and pre-programmed channel are all selectable.  

The IC-F5021 | IC-F6021 is to be a companion to Icom's IC-F3021/F4021 series hand held radios.  Although the IC-F5021 | IC-F6021 can be used with many radio types, the design of the F3021 series and the F5011 series provides for seamless ease-of-use together.  number of channels and banks, signaling formats, programming software and voice scrambler are fully compatible.

What's in the box:

Antenna Information

You will need an antenna for this radio. When selecting an antenna please note:

• The specific frequencies you use in the radio must fall within the antenna's frequency range.
• You will need an antenna mount with a PL259 connector to attach the antenna to this radio.
• If the mounting surface is NOT metal you will need a "No Ground Plane" antenna. Metal surfaces can use either type.
• Our "Accessories > Antennas | Mobile" category has other name-brand antennas and mounts, including no ground plane antennas.
• Also, you will need a length of coaxial cable terminated with a PL-259 (UHF Male) type connector for the ICOM F5021 / F6021 Radio.

*  Radios modified at the customer's request, such as programming or installation of logic boards, are not returnable.  For more information please see our Returns Policy.

This radio is requires an FCC license to operate. We can assist you with getting a license.