Menu
Your Cart

Icom Repeater FR5300 VHF | FR6300 UHF

Icom FR5300 FR6300 Repeater
Icom FR5300 FR6300 Repeater
Icom FR5300 FR6300 Repeater
Icom FR5300 FR6300 Repeater
Icom Repeater FR5300 VHF | FR6300 UHF
  • Product Pdf

    FR5300_FR6300_Brochure :
$2,795.95
  • Stock: In Stock
  • Brand: ICOM
  • Model: IC-FR5300 | IC-FR6300 2 RF Modules
  • SKU: Icom-FR5300-FR6300-2-RF

Available Options

Icom Repeater FR5300 | FR6300 - IDAS Repeater with 2 RF Modules Installed

In this version of the Icom FR5300/FR6300 Repeater, 2 RF modules are installed in the box. Each RF module operates independently, giving you 2 repeaters at a reduced price. Because of the 2nd RF module, there is no ability to install a duplexer or preselector internally within the device, external duplexers and/or preselectors must be used.

Configuration Options:

  • 2 UHF Modules
  • 2 VHF Modules
  • 1 UHF & 1 VHF Module Each
  • Scalable from 1 to 32 channels
  • 50W at 50% Duty Cycle, 25W at 100% Duty Cycle
  • 2U Height
  • IDAS Digital Technology

Trunking Capable, Trunking Options:

Simulcast Conventional

Increase range in difficult RF environments with Simulcast Conventional. Simulcast Conventional uses one frequency for a for all subscriber units. The one frequency keeps signals strong in overlapping areas, this also eliminates the need for scanning, voting, and roaming. The UC-FR5300 board and CF-FR5300SC card are required to work with simulcast, simulcast only works with the FR5300.

Multi-site Conventional Systems

Inserting the CF-FR5000 02 card into the UC-FR5300 board, the UC and repeaters increase their capabilities to include multi-site conventional operation. Multi-site conventional systems connect conventional repeaters using an IP network to merge geographically distributed repeaters and operate them as one, or allow UHF and VHF repeaters to share traffic in a crossover configuration. This is ideal for operations that can merge multiple talk sites into one. Industries such as construction, mining, education, transportation and logistics would benefit.

Multisite Conventional systems are possible with IDAS™ LINQ™. Choose from four configurations:

  1. LINQ™REPEAT
  2. LINQ™REPEAT+
  3. LINQ™VOTE
  4. LINQ™VOTE+.


Single Site Trunking

The UC-FR5300 board and CF-FR5000MT card in a repeater can be configured to a voting receiver, which is best for radios that cannot reach transmitters in areas of poor coverage. Once a signal is received at the voter, it is then transferred via IP to the repeater which then transmits the strongest signal. Voting allows the extension of indoor or underground communication which would benefit industries such as education, healthcare and hospitality.

Multi-site Trunking - Mulit-TrunK

Installing and programming a UC-FR5300 board into the FR5300 repeater can transform the FR5300 from a conventional repeater into a trunked repeater system for a single site. Any IDAS™ subscriber digital radios are ready to operate on conventional or trunked digital radios for easy configuration choice. Single Site Trunking is ideal for a large area of operation with multiple groups and users.


Other FR5300 | FR6300 Features:

  • Double Channel Capacity
    IDAS doubles the capacity of the current 12.5kHz channel allocation. The IDAS system occupies only 6.25kHz spacing per channel. With the improved sensitivity of narrow band communications, increased communication greater than 12.5kHz analog mode can be achieved. Icom allows you to meet any narrow banding requirements today, and provides a solution to any future spectrum deficiencies.
  • Digital and Analog Mixed Mode Operation
    The IC-FR5300 | FR6300 can receive both analog and digital signals on a single channel. You can partially introduce the IDAS system, while using the existing analog radios in a system. The IDAS system allows you to scale migration to narrow band digital at your own pace and need.
  • Superior Audio Quality
    The IDAS system uses the AMBE+2™ codec, which provides clear audio and simultaneous data communication. The built-in audio compander improves the signal to noise ratio and provide clear audio.  The Compander is for analog mode only, digital mode does not require Compander since digital communication quality is superior to anaolog by nature.
  • 19-inch Rack Mount 2U Height Low-Profile Design
    The IC-FR5300 | FR6300 uses only 2U height. This low profile configuration allows you to stack multiple units in an industry standard 19-inch rack and provides great space efficiency.
  • 50W Output at 50% Duty Cycle, 25W at 100% Duty Cycle Operation
    Employing a high stability ±0.5ppm oscillator and high performance power amplifier, the IC-FR5300 series provides a reliable 100% duty cycle operation at 25W output. When operated at the high power setting of 50W, the repeater operates with a 50% duty cycle.
  • Multiple CTCSS, DTCS Tone and RAN Code
    The IC-FR5300 | FR6300 decodes multiple CTCSS and DTCS as well as digital RAN (Radio Access Number) codes on a per channel basis (up to 16 tones/codes) and downlinks the received signal with a specified tone/code. This function is useful for sharing a channel with multiple groups and provides quiet stand-by while using other groups.
  • Superior Receiver Performance
    The IC-FR5300 series has class leading receiver performance of selectivity and intermodulation rejection. It improves the quality of the repeater service even under congested band conditions.
  • D-SUB 25-pin Accessory Connector
    The IC-FR5300 series has a programmable D-SUB 25-pin accessory connector for connecting various trunking controllers or external remote control devices. Also, modulation / demodulation signals can be input / output from the D-SUB connector.
  • Low voltage alert
  • DTMF encoder/decoder
  • 5-Tone decoder* (For analog mode only)
  • PTT priority setting (Local Microphone, external PTT or repeater operation)
  • CW ID transmitter
  • RC-FS10 remote communicator software works as a simple dispatch station to communicate with radio terminals through the repeater
  • Receiver voting function improves talkback capability of radio terminals in the field
  • 19-inch rack mount 2U height low profile

The FR5300 | FR6300 repeater requires a power supply for operation. Order separately, see 'Accessories' tab to order.

  Repeaters take 1-2 weeks to ship depending on configuration and tuning.


What’s in the box:
1    IC-FR5300 (VHF) or IC-FR6300 (UHF) Repeater with 2 RF modules installed
1    DC power cable
1    Handle kit
1    Key assignment stickers
1    Owners Manual

The FR5300 | FR6300 repeater requires a power supply for operation. Order separately, see 'Accessories' tab to order.

Radios modified at the customer's request, such as programming or installation of logic boards, are not returnable.  For more information please see our Returns Policy.

This radio is requires an FCC license to operate. We can assist you with getting a license.

 

General Features
FCC Approval Part 90 (Business License)
Frequency Band(s) VHF or UHF
# of Channels & Zones 32
Output Power 50W Output at 50% Duty Cycle, 25W at 100% Duty Cycle
# of Programmable Keys 5 Programmable Buttons
Digital Yes, analog and digital mixed mode on a single channel
Trunking Capable Yes, either Simulcast Conventional or Multi-site Conventional

Radio Programming Options

The following does not apply to FRS, MURS, GMRS, LTE, Satellite, or IP radios.

Most business radios aren't ready to use out-of-the-box. So radio programming is needed to set the frequencies in the radio. For some radios the frequencies can be set through a menu interface. While other radios must be programmed using a PC, radio software, and a cable to connect the radios.

Here are your programming options:

  • You can program the radio(s)
    • For radios with pre-stored frequencies you can easily program them through the radio's menu interface.
    • For PC programmable radios you will need the programming cable(s) and software. In many cases you can purchase this from us.
  • We can program your radios
    • Email us your Frequencies & Call Sign - the FCC requires dealers to verify your license before we program.
    • Please allow 1-2 days for first-time setup of radio programming.
  • Match to your Previous Order
    • If you've ordered from us before we have your information stored.
  • If you don't have a FCC license we can help you apply for one
    • These licenses are for businesses, non-profit organizations, local and state government agencies.
    • We do all the work! Give us a call at 855-289-2929.


What is included in Basic Radio Programming?

Basic radio programming is designed to get you up and running with a configuration which includes:

  • Up to 16 channels programmed to your FCC assigned frequencies (simplex or duplex)
  • A default configuration of key functions
  • Your program settings saved for future purchases
  • No password protection to allow re-programming by another person

For customers who already have radios we will match from your existing radio of the same model (requires you to send us a radio). 

 

Programming Services Not Included:

At this time we do not provide programming of advanced features. The features below are NOT included with basic programming.

  • Programming radios purchased elsewhere
  • More Than 16 Channels
  • Channel Scan / Priority Scan
  • Encryption
  • Signal Tones (DTMF, 5-Tone, 2-Tone)
  • Private (1 to 1) calling
  • Group 1 to many calling
  • All Call
  • Emergency System
  • Man Down System
  • Lone Worker
  • Advanced Audio Profiles
  • Dual Capacity Direct Mode
  • Voice Announcement
  • Text Messaging
  • Work Order Ticketing
  • ARTS
  • Remote Monitor
  • Telephone Interconnect

* This does not include all advanced features and should only be used to establish an example of what features are to be considered to be advanced.



Write a review

Note: HTML is not translated!
Bad Good
Captcha

Icom Repeater FR5300 | FR6300 | 2-Repeaters-In-1-Box