- Stock: In Stock
- Brand: ICOM
- Model: CS-F7500
Icom Programming Software for F7010 F7020 F7510 F7520 Radios
****** DOWNLOAD ONLY ******
This item is for download only. We no longer ship CD's.
This Icom programming software is designed to perform data entry, setting and cloning. Included on the CD is a Help file to describe functions and operations. This software is for radios with firmware v2.4 or later.
Older Software and Firmware:
- CS-F7500 v2.1 Software for v2.1 Firmware
- CS-F7500 v.1.1 Software for v1.4 Firmware
- CS-F7500 v1.0 Software for v1.3 Firmware
Important Update Notice for Firmware v2.4
Do not cycle power while updating. When updating while an RMK-5 or 7 is connected, the remote heads will update for 30 to 60 minutes AFTER the radio body has updated. Please wait until the head update completes and when the RMK Displays have returned to normal appearance.
Checking the radio's firmware
This software is for radios with firmware v2.4 or later. To know if this is the correct version for your radios you will need to check your radio's firmware version. To check your radio's firmware level:
- Press and hold P1 and OK.
- Switch the power on.
- Press P1 to select Firm Info.
- Alternatively, you can power on the radio, press OK, then scroll to the Information Icon. Press OK and select Firmware Info.
If your radio's firmware is 2.3 or older see the list below for the version you will need:
- CS-F7500 v2.1 Software for v2.1 Firmware
- CS-F7500 v.1.1 Software for v1.4 Firmware
- CS-F7500 v1.0 Software for v1.3 Firmware
Hardware Requirments for This Software
To use this cloning software, the following hardware and software are required:
- Microsoft® Windows 7 Operating System(OS).
- IMPORTANT: Read the Driver Instructions thoroughly before installing the Windows 7 drivers.
- Microsoft® Windows 8, 8.1, or 10 Operating System(OS).
- Use Windows Built-in Drivers.
- Cables:
- USB (A - micro B type) or OPC-2338 & OPC-1862 (Portables)
- OPC-2363 (Mobiles)
- Note: When using comercially available USB cables, be sure they are capable of transfering data. Some USB cables are for charging only. If a cable is capable of transfering data, it will appear on the computer in Device Manager/Ports when it is connected to the radio (powered on).
- For a list of cables needed by radio model see our Icom Software Programming Guide.
Firmware/Software Cross-Reference
| Firmware Version | Associated Software | Update Summary *(see note below) | Introduction Date |
| v2.4 | v2.1 | Enables use of RMK-5/RMK-7/HM-218, fixed key load mode when voltage display enabled, improved SQL set to "0" capabilities | 2/21/2018 |
| v2.1 | v2.1 | Enables feature licenses for P25 Trunking (Phase 1 and 2), AES Encryption, Front Panel Programming, Trunking Packet Data Service. | 12/07/2017 |
| v1.3, v1.4 | v1.0, v1.1 | Fixed audio recording quitting after a set time, Antenna icon visibility improved after cancelling scan. | 8/14/2017 and 9/15/2017 |
* NOTE: For additional details, refer to the firmware Release Notes included in the firmware folder.
Attention: Once processed, software orders cannot be cancelled, exchanged, or returned for refund. Once your order has completed you can download your software.
Warning Be advised, serious penalties and prosecution can result from unlicensed transmission on frequencies which require a license, and/or interference with public safety transmissions.
All Land Mobile radios (LMR) require an FCC license to operate.
