Menu
Your Cart

Icom F3201DEX Intrinsically Safe Radio ATEX

Icom F3201DEX
Waterproof
Icom F3201DEX Intrinsically Safe Radio ATEX
$1,050.40
  • Stock: In Stock
  • Brand: ICOM
  • Model: F3201DEX
  • SKU: F3201DEX

Available Options

Icom IC-F3210DEX | Intrinsically Safe Radio

  • 16 Channels
  • VHF Only
  • 3 Programmable Keys
  • Low electrical resistivity body
  • Digital & Analog Mixed Mode
  • 1 Watt
  • DTMF Autodial
  • Repeater Capable
  • Channel Announce
  • 19-21 hours Battery life
  • PC programmable
  • Compact Design
  • IDAS Conventional
  • IDAS Single-site Type-D Trunking

Icom F3201DEX IEC & ATEX Certifications

The F3201DEX radio has some of the highest ATEX and IECEx ratings to meet your intrinsically safe needs. Please see the Spec Sheet for this radio under the Downloads tab for exact ATEX and IECEx ratings and their meaning.

Icom F3201DEX Dust and Water Tight IP67

The IC-F3201DEX provides rugged protection against dust and water that is equivalent to IP67. The IC-F3201DEX can withstand 1m depth of water for 30 minutes and its dust-tight construction shuts out powder dust, sand and other objects.

Icom F3201DEX | F4201DEX Digital Operation

The IC-F3201DEX provides can program NXDN™ Type-D single-site trunking and digital conventional as well as analog mode per channel. The following digital features are programmable.


• PTT ID (TX)   • Individual/Group calls   • Block decode   • Radio check (RX)   • Stun/kill/revive (RX)   • Call alert (RX)   • Remote monitor (RX)   • Emergency (TX)   • Digital voice scrambler (15-bit)   • Power ON/OFF status call (TX)   • RAN (Radio Access Number)   • Voting scan for multi-site conventional operation
         TX: Transmit, RX: Receive

Icom F3201DEX Analog Compatible

The IC-F3201DEX has built-in 5-Tone, 2-Tone, CTCSS and DTCS signaling capability for analogue mode group communication and selective calling. The lone worker and man down functions automatically send an emergency signal to assist in worker safety. The radio is perfect for use as an analogue transceiver ready for future digital migration.

Warning: The battery charger, BC-212EX must not be used in areas with an explosive atmosphere. Also, DO NOT use the transceiver with any accessories other than the Icom approved options for this radio.

What's in the box:
1   F3201DEX Radio
1   Rapid Charger (BC-212EX)
1   AC adapter (BC-123SA)  
1   Antenna
1   Battery (BP-277EX)
1   Belt Clip
1   Owner's Manual


Radios modified at the customer's request, such as programming or installation of logic boards, are not returnable.  For more information please see our Returns Policy.

This radio is requires an FCC license to operate. We can assist you with getting a license.

General Features
FCC Approval Part 90 (Business License)
Frequency Band(s) VHF (F3201DEX)
# of Channels & Zones 16
Output Power 1 Watt
Weight (with battery) 1.01 lb
Display No
# of Programmable Keys 3
Full 16-Key Keypad No
IP Rating (Water & Dust) IP67
Receiving Audio Output 400mW
Digital Yes
Trunking Capable Yes
Voice Scrambler | Encryption Yes, when used in IDAS™ system (digital mode only)
Other Intrinsically Safe ATEX, Channel Announce

Radio Programming Options

The following does not apply to FRS, MURS, GMRS, LTE, Satellite, or IP radios.

Most business radios aren't ready to use out-of-the-box. So radio programming is needed to set the frequencies in the radio. For some radios the frequencies can be set through a menu interface. While other radios must be programmed using a PC, radio software, and a cable to connect the radios.

Here are your programming options:

  1. We can program your radios - with radio orders 
    • We provide basic radio programming for radios ordered through us. See the description below of basic radio programming.
    • Email us your Frequencies & Call Sign - the FCC requires dealers to verify your license before we program.
    • Please allow 1-2 days for first-time setup of radio programming.
    • Due to staffing limitations, we are not able to program radios purchased from other dealers.
  2. Match to your Previous Order
    • If you've ordered from us before we have your information stored.
  3. You can program the radio(s)
    • Connect Systems (all models): You can purchase software and cables from us. 
    • Kenwood ProTalk Business Radios (NX-P1300/NX-P1200 series, TK series, PKT)
      • Have pre-stored frequencies and you can easily program these radios through the radio's menu interface.
      • Custom frequencies will require dealer programming.
    • Icom (all models): Icom no longer allows dealers to sell software and cables over the internet. You may call us to discuss your options.
    • Motorola Business Radios (models beginning with CLP. CLS, RM, RD):
      • Have pre-stored business frequencies (Part 90). Software to program these radios is available on the Motorola website.
      • Just go to the product page on Motorola's website and you can download it for free. We can sell you the cable.
      • Custom frequencies will require dealer programming.
    • Motorola Commercial Radios (models beginning with CP, CM, MagOne):
      • Software to program these can be purchased directly from Motorola. We can sell you the cable.
    • Vertex Standard Radios:  You can purchase software and cables from us. (some cables have been discontinued)
  4. If you don't have a FCC license we can help you apply for one.
    • These licenses are for businesses, non-profit organizations, local and state government agencies.
    • We do all the work! Give us a call at 855-289-2929.


What is included in Basic Radio Programming?

Basic radio programming is designed to get you up and running with a configuration which includes:

  • Up to 16 channels programmed to your FCC assigned frequencies (simplex or duplex)
  • A default configuration of key functions
  • Your program settings saved for future purchases
  • No password protection to allow re-programming by another person

For customers who already have radios we will match from your existing radio of the same model (requires you to send us a radio). 

 

Programming Services Not Included:

At this time we do not provide programming of advanced features. The features below are NOT included with basic programming.

  • Programming radios purchased elsewhere
  • More Than 16 Channels
  • Channel Scan / Priority Scan
  • Encryption
  • Signal Tones (DTMF, 5-Tone, 2-Tone)
  • Private (1 to 1) calling
  • Group 1 to many calling
  • All Call
  • Emergency System
  • Man Down System
  • Lone Worker
  • Advanced Audio Profiles
  • Dual Capacity Direct Mode
  • Voice Announcement
  • Text Messaging
  • Work Order Ticketing
  • ARTS
  • Remote Monitor
  • Telephone Interconnect

* This does not include all advanced features and should only be used to establish an example of what features are considered advanced.



Thumb File information
F3201DEX F4201DEX Spec Sheet.pdf 292.43KB

Write a review

Note: HTML is not translated!
Bad Good
Captcha

Icom F3201DEX Intrinsically Safe Radio ATEX